Vivotek IP8362 - Page 145

VIVOTEK
User's Manual - 145
7.24 UART control
Group: uart (capability.nuart > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
ptzdrivers_i<0~19,
127>_name
string[40] 1/4 Name of the PTZ driver.
ptzdrivers_i<0~19,
127>_location
string[128] 1/4 Full path of the PTZ driver.
enablehttptunnel <boolean> 4/4 Enable HTTP tunnel channel to control UART.
Group: uart_i<0~(n-1)> n is uart port count (capability.nuart > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
baudrate 110,300,600,1200,2
400,3600,4800,720
0,9600,19200,3840
0,57600,115200
4/4 Set baud rate of COM port.
databit 5,6,7,8
6,7,8
<product
dependent>
4/4 Data bits in a character frame.
paritybit none,
odd,
even
4/4 For error checking.
stopbit 1,2 4/4 1
2-1.5 , data bit is 5
2-2
uartmode rs485,
rs232
4/4 RS485 or RS232.
customdrvcmd_i<0~
9>
string[128] 1/4 PTZ command for custom camera.
speedlink_i<0~4>_n
ame
string[40] 1/4 Additional PTZ command name.
speedlink_i<0~4>_c
md
string[128] 1/4 Additional PTZ command list.
ptzdriver 0~19,
127 (custom),
128 (no driver)
4/4 The PTZ driver is used by this COM port.