Vivotek IP8362 - Page 150

VIVOTEK
150 - User's Manual
audio_aec <boolean> 0/7 Indicate whether to support acoustic echo
cancellation.
audio_extmic <boolean> 0/7 Indicate whether to support external
microphone input.
audio_linein <boolean> 0/7 Indicate whether to support external line
input.
(It will be replaced by audio_mic and
audio_extmic.)
audio_lineout <boolean> 0/7 Indicate whether to support line output.
audio_headphoneout <boolean> 0/7 Indicate whether to support headphone
output.
audioin_codec aac4, gamr, g711
<product dependent>
0/7 Available codec list for audio input.
audioout_codec g711
<product dependent>
0/7 Available codec list for SIP.
camctrl_httptunnel <boolean> 0/7 Indicate whether to support httptunnel.
camctrl_httptunnelclie
nt
<boolean> 0/7 Indicate whether to support httptunnel
client.
camctrl_privilege <boolean> 0/7 Indicate whether to support “Manage
Privilege” of PTZ control in the Security
page.
1: support both
/cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
uart_httptunnel <boolean> 0/7 Indicate whether to support HTTP tunnel for
UART transfer.
transmission_mode Tx,
Rx,
Both
0/7 Indicate transmission mode of the
machine: TX = server, Rx = receiver box,
Both = DVR.
network_wire <boolean> 0/7 Indicate whether to support Ethernet.
network_wireless <boolean> 0/7 Indicate whether to support wireless.
wireless_s802dot11b <boolean> 0/7 Indicate whether to support wireless
802.11b+.
wireless_s802dot11g <boolean> 0/7 Indicate whether to support wireless
802.11g.
wireless_encrypt_wep <boolean> 0/7 Indicate whether to support wireless WEP.
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless WPA.
wireless_encrypt_wpa <boolean> 0/7 Indicate whether to support wireless WPA2.