Vivotek IP8362 - HTTPS Storage Management

VIVOTEK
158 - User's Manual
adaptive_postevent
<product dependent>
0~10 6/6 Indicate when is the adaptive recording stopped
after the event trigger point (seconds)
7.34 HTTPS
Group: https (capability.protocol.https > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP connection
redirect to HTTPS connection
method auto,
manual,
install
6/6 auto => Create self-signed certificate
automatically.
manual => Create self-signed certificate manually.
install => Create certificate request and install.
status -3 ~ 1 6/7 Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active
countryname string[2] 6/6 Country name in the certificate information.
stateorprovincename string[128] 6/6 State or province name in the certificate
information.
localityname string[128] 6/6 The locality name in the certificate information.
organizationname string[64] 6/6 Organization name in the certificate information.
unit string[32] 6/6 Organizational unit name in the certificate
information.
commonname string[64] 6/6 Common name in the certificate information.
validdays 0 ~ 3650 6/6 Valid period for the certification.
7.35 Storage management setting
Currently it’s for local storage (SD, CF card)
Group: disk_i<0~(n-1)> n is the total number of storage devices. (capability.storage.dbenabled > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.