VIVOTEK
74 - User's Manual
Privacy mask
Advanced Mode
Click
Privacy Mask
to open the settings page. On this page, you can block out certain sensitive zones to
address privacy concerns.
■ To set the privacy mask windows, follow the steps below:
1. Click
New
to add a new window.
2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover.
3. Enter a Window Name and click
Save
to enable the setting.
4. Check
Enable privacy mask
to enable this function.
NOTE
►
Up to 5 privacy mask windows can be set up on the same screen.
► If you want to delete the
privacy mask
window, please click the ‘x’ on the upper right corner of the
window.
2011/03/15 17:08:56
To Next Page
Loading...
