Vivotek IP8372 - Channel-Specific Image Settings; Image Brightness Adjustment; Image Saturation Adjustment

VIVOTEK
User's Manual - 151
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5,100 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation
percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
sharpness -3~3,100 0 4/4 Adjust sharpness of image
according to mode settings.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
gammacurve 0~100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light
mode.
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3,100 0 4/4 Adjust sharpness of image
according to mode settings.
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpness value of