Vivotek IP9167-HP - Page 199

VIVOTEK
User's Manual - 199
Level 1~4(low ~ high)
The higher speed level meas shorter AE
converged time during AE executing.
* Only available when
"capability_image_c<0~(n-1)>_aespeed" is 1
aespeed_sensitivity
<product dependent>
1~100 4/4 The sensitivity of AE converge speed.
1~20: level 1
21~40: level 2
41~60: level 3
61~80: level 4
81~100: level 5
Level 1~4(low ~ high)
The higher sensitivity level meas that it is easy
to be trigger while scene changed.
* Only available when
"capability_image_c<0~(n-1)>_aespeed" is 1
and
"capability_image_c<0~(n-1)>_aespeedsupp
ortsensitivity" is 1.
flickerless
<product dependent>
<boolean> 4/4 Turn on(1) or turn off(0) the flickerless mode
* Only available when
"capability_image_c<0~(n-1)>_flickerless" is
1
7.9Time Shift settings
Group: timeshift for n channel profucts and m stream
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
(capability.timeshift > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 4/4 Enable time shift streaming.
c<0~(n-1)>_s<0~(m-1)
>_allow
<boolean> 4/4 Enable time shift streaming for specific
stream.