Vivotek IP9167-HP - Page 205

VIVOTEK
User's Manual - 205
1:enable
* Only available when 'eis' is listed in
"capability_image_c<0~(n-1)>_is_mode".
eis_strength
<product dependent>
1~100 4/4 Strength of electronic image stabilizer
* Only available when 'eis' is listed in
"capability_image_c<0~(n-1)>_is_mode".
dis_mode
<product dependent>
<boolean> 4/4 Digital image stabilizer
0:disable
1:enable
* Only available when 'dis' is listed in
"capability_image_c<0~(n-1)>_is_mode".
dis_strength
<product dependent>
1~100 4/4 Strength of digital image stabilizer
* Only available when 'dis' is listed in
"capability_image_c<0~(n-1)>_is_mode".
scene_mode
<product dependent>
Available value
is listed in
"capability_im
age_c<0~(n-1
)>_scenemod
e_supporttype
"
<product
dependent>
4/4 Value of scene mode
* Only available when
"capability_image_c<0~(n-1)>_scenemode_
support" is 1
restoreatwb <positive
integer>
4/4 Restore of adjusting white balance of image
according to mode settings
freeze
<product dependent>
<boolean> 4/4 Enable/disable Image freeze while patrolling.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_freeze" is 1
deinterlace_enable <boolean> 4/4 Enable/disable deinterlace function.
0: disable
1: enable
* Only available when
"capability_image_c<0~(n-1)>_deinterlace_s
upport" is 1.
deinterlace_mode spatial,blend 4/4 Users can choose between two different
deinterlacing techniques:
Spatical mode provides the best image quality,
while Blend mode provides better image