Vivotek IP9167-HP - Page 250

VIVOTEK
250 - User's Manual
extled_interface do,irring
<product dependent>
0/7 The device interface of external IR led:
"do": digital output
"irring":IR ring
* Only available when
"capability_daynight_c<0~(n-1)>_externalir" is
1
* We support this parameter when the version
number (httpversion) is equal or greater than
0304a.
mode auto,daynight,di,di2,d
i3,di4,schedule,-
<product dependent>
0/7 Indicate the day / night switch mode.
"auto": The Camera automatically judges the
current operation mode by the level of ambient
light detected.
"daynight": support day mode and night mode.
In day mode, the camera streams color video.In
night mode, the camera streams black and white
video in low light environments.
"di": the camera automatically switches the
current mode when a ditigal input 1 is triggered.
"di2": the camera automatically switches the
current mode when a ditigal input 2 is triggered.
"di3": the camera automatically switches the
current mode when a ditigal input 3 is triggered.
"di4": the camera automatically switches the
current mode when a ditigal input 4 is triggered.
"schedule": The Camera switches between day
mode and night mode based on a specified
schedule.
"-": not support
* We support this parameter when the version
number (httpversion) is equal or greater than
0309d.