Vivotek MD8564-EH - Page 190

VIVOTEK
190 - User's Manual
"capability_image_c<0~(n-1)>_wdrc_mode"
is 1
wdrc_strength
<product dependent>
1~100 4/4 The strength of WDR enhanced.
The bigger value means the stronger strength
of WDR enhanced.
* Only available when
"capability_image_c<0~(n-1)>_wdrc_mode"
is 1
aespeed_mode
<product dependent>
<boolean> 4/4 Turning AE converge speed on or off.
0: off
1: on
* Only available when
"capability_image_c<0~(n-1)>_aespeed" is 1
aespeed_speedlevel
<product dependent>
1~100 4/4 The speed level of AE converge speed.
1~20: level 1

21~40: level 2
41~60: level 3
61~80: level 4
81~100: level 5
Level 1~4(low ~ high)
The higher speed level meas shorter AE
converged time during AE executing.
* Only available when
"capability_image_c<0~(n-1)>_aespeed" is 1
aespeed_sensitivity
<product dependent>
1~100 4/4 The sensitivity of AE converge speed.
1~20: level 1
21~40: level 2
41~60: level 3
61~80: level 4
81~100: level 5
Level 1~4(low ~ high)
The higher sensitivity level meas that it is easy
to be trigger while scene changed.
* Only available when
"capability_image_c<0~(n-1)>_aespeed" is 1
and
"capability_image_c<0~(n-1)>_aespeedsupp
ortsensitivity" is 1.
flickerless <boolean> 4/4 Turn on(1) or turn off(0) the flickerless mode