Vivotek MD8564-EH - Page 302

VIVOTEK
302 - User's Manual
encrypt none,
wep,
wpa,
wpa2
6/6 Encryption method:
none: NONE,
wep: WEP,
wpa: WPA,
wpa2: WPA2PSK
authmode OPEN, SHARED 6/6 Authentication mode.
* Only valid when "wireless_encrypt" is "wep"
keylength 64, 128 6/6 Key length in bits.
* Only valid when "wireless_encrypt" is "wep"
keyformat HEX, ASCII 6/6 Key1 ~ key4 presentation format.
* Only valid when "wireless_encrypt" is "wep"
keyselect 1 ~ 4 6/6 Default key number.
* Only valid when "wireless_encrypt" is "wep"
key1 password [26] 6/6 WEP key1 for encryption.
* Only valid when "wireless_encrypt" is "wep"
key2 password [26] 6/6 WEP key2 for encryption.
* Only valid when "wireless_encrypt" is "wep"
key3 password [26] 6/6 WEP key3 for encryption.
* Only valid when "wireless_encrypt" is "wep"
key4 password [26] 6/6 WEP key4 for encryption.
* Only valid when "wireless_encrypt" is "wep"
algorithm AES, TKIP 6/6 Algorithm
* Only valid when "wireless_encrypt" is "wpa" or
"wpa2"
presharedkey password [64] 6/6 WPA/WPA2PSK mode pre-shared key.
* Only valid when "wireless_encrypt" is "wpa" or
"wpa2"
7.49 Shock detection
Group: shock_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin" (capability_peripheral_c<0~(n-1)>_shockdetection_support > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
alarm_enable <boolean> 4/4 Enable shock detection's alarm.
alarm_level 1~100 4/4 The value indicate the support strength level of
shock detection's alarm.