Vivotek SD8362E Installation Guide

7
English
If you install the corner parapet bracket, use the included alignment sticker, and mark the
drill holes through the mounting slots on the brackets.
NOTE:
4. Use a crescent wrench to secure the outer brackets to the brackets on the wall using
the M8x25 hex bolts and washers. Do not completely tighten the bolts yet! When the
speed dome is installed to the mount pipe, it needs to be swiveled out to the desired
position.

Vivotek SD8362E Specifications

General

Brand	Vivotek
Model	SD8362E
Category	Security Camera
Language	English