This document is an installation guide for mounting accessories for VIVOTEK SD8311E, 8312E, 8313E, 8321E, 8322E, 8323E, and 8362E Speed Dome cameras. The accessories covered are the AM5102 Dome Cap and the AM-231 Parapet Mount.
Function Description:
The VIVOTEK SD83xxE series are Speed Dome cameras, designed for surveillance applications requiring wide coverage and detailed monitoring. The AM5102 Dome Cap is a replacement dome cap that facilitates cable routing for these cameras, featuring a threaded tube end for secure attachment and cable management. The AM-231 Parapet Mount is a robust bracket system designed to securely install these speed dome cameras onto a parapet wall or corner, allowing for optimal positioning and stability in outdoor or elevated surveillance scenarios.
Important Technical Specifications:
Compatible VIVOTEK Cameras:
- SD8311E
- SD8312E
- SD8313E
- SD8321E
- SD8322E
- SD8323E
- SD8362E
AM-231 Parapet Mount (Mechanical Drawings):
Included Screws for Parapet Set:
- Sleeve anchors 5/16" x3": 6 pieces
- Hex bolts M8x25: 6 pieces
- Hex bolts M8x70: 3 pieces
- Hex lock nuts M8: 6 pieces
- Washers M8: 15 pieces
- Lock washers M8: 15 pieces
Parapet Wall Requirements:
- Concrete strength: 4000 PSI or higher.
- Each sleeve anchor can withstand an 800kgs pull-out force.
Clearance Requirements for Parapet Mount:
- Minimum clearance between the upper edge of the parapet wall and the metal bracket fixed to the wall: 65 mm.
- Minimum space below the parapet bracket for routing cables: 2 inches (approx. 50.8 mm).
Cable Length for Pipe Arm:
- Minimum cable length for passing through the pipe arm: 250 cm.
Usage Features:
- Versatile Mounting: The AM-231 mount supports both standard parapet wall installations and corner installations, providing flexibility for various architectural structures.
- Secure Installation: The mounting system utilizes sleeve anchors and M8 hex bolts, washers, and lock nuts to ensure a strong and stable attachment to concrete parapet walls.
- Cable Management: The AM5102 Dome Cap integrates a threaded tube end, allowing for organized and protected routing of camera cables through the mount's pipe arm. The design emphasizes pre-installation cabling to simplify the overall setup.
- Adjustable Positioning: The parapet mount allows the pipe arm to be swiveled outwards to the desired position before final tightening of the M8x25 hex bolts, enabling precise camera orientation.
- Alignment Stickers: Included alignment stickers assist in accurately marking drill hole positions for both standard and corner parapet mount installations, ensuring proper bracket placement.
Maintenance Features:
- Robust Construction: The use of durable materials and strong fasteners (M8 bolts, sleeve anchors) suggests a design intended for long-term outdoor use, minimizing the need for frequent maintenance due to wear and tear.
- Cable Protection: Routing cables through the pipe arm and the AM5102 Dome Cap helps protect them from environmental elements and potential damage, contributing to the longevity of the camera system.
- Installation Guide: The detailed installation guide provides clear steps and warnings (e.g., about twisting bolts to avoid cable damage), which, if followed, can prevent common installation errors that might lead to future maintenance issues.
- Component Replacement: The modular nature of the dome cap and mount components implies that individual parts could potentially be replaced if damaged, rather than requiring a full system overhaul.
Need help?
General
To Next Page
