Need help?Do you have a question about the Vivotek SD8333-E and is the answer not in the manual?
Describes how to perform system reset and restore factory default settings.
Detailed instructions for mounting and connecting the camera hardware.
Guidance on installing the wall mount bracket securely.
Steps for making cable connections and attaching the camera's top section.
Instructions on how to properly mount the camera body to the top section.
Guides for connecting the camera to the internet via a router or other methods.
Instructions on configuring router port forwarding for camera access.
Details on setting up a static IP address for the network camera.
Instructions for accessing the camera feed and settings via web browsers.
How to view the camera stream using RTSP-compatible media players.
How to control the camera's view using mouse and on-screen controls.
Configuring host name, system time, and NTP settings.
Steps for upgrading the camera's firmware to the latest version.
Process for restoring camera settings to factory defaults.
Configuring video title, timestamp, color, and power line frequency.
Adjusting white balance and image parameters like brightness and contrast.
Managing exposure level, mode, gain, and noise reduction.
Configuring automatic IR cut filter behavior for day and night modes.
Defining multiple video streams with custom resolutions and compression.
Adjusting frame size, frame rate, bit rate, and quality for video streams.
Setting the network connection type and IP address assignment.
Setting up HTTP streaming with authentication and port configurations.
Configuring RTSP streaming with authentication and access names.
Setting up root password and managing user accounts with different privileges.
Enabling authentication and encrypted communication using SSL certificates.
Setting and arranging preset camera positions for patrol tours.
Setting up event names, priorities, schedules, and trigger sources.
Setting up recording names, enabling recording, and adaptive recording.
Configuring IP address, subnet mask, default gateway, DNS, and WINS servers.
Configuring video input type, resolution, and frame rate.
Channel-specific settings for CMOS frequency, white balance, and zoom ratio.
Setting codec types, bitrates, and quality levels for video streams.
Channel-specific image adjustments like brightness, contrast, and noise reduction.
Setting up motion detection windows, sensitivity, and object size.
Setting pan, tilt, zoom, focus speeds, and preset locations.
Setting and managing 3D privacy masks using CGI commands.
General| Brand | Vivotek |
|---|---|
| Model | SD8333-E |
| Category | Security Camera |
| Language | English |
To Next Page