Vivotek SD8333-E - Camera PTZ Control; Camera PTZ Control Parameters

VIVOTEK
User's Manual - 165
7.23 camera PTZ control
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
ccdtype string[16] 6e 6/7 6e : SD8333
motortype string[16] 02 6/7 02: Paugu
cameraid 1 ~ 255 1 1/4 Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera
ID, e.g. 2400bps, camera ID
1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera will
only accept the inputs with the
corresponding ID.
panspeed -5 ~ 5 0 1/4 Pan speed
tiltspeed -5 ~ 5 0 1/4 Tilt speed
zoomspeed -5 ~ 5 0 1/4 Zoom speed
autospeed -5 ~ 5 0 1/4 Auto pan speed
focusspeed -5 ~ 5 0 1/4 Auto focus speed
preset_i<0~(npreset-
1)>_name
string[40] <blank> 1/4 Name of the preset location.
preset_i<0~(npreset-
1)>_pan
0 ~ 7999 <blank> 1/4 Pan position at each preset location.
preset_i<0~(npreset-
1)>_tilt
0 ~ 2445 <blank> 1/4 Tilt position at each preset location.
preset_i<0~(npreset-
1)>_zoom
0 ~ 16384 <blank> 1/4 Zoom position at each preset
location.
preset_i<0~(npreset-
1)>_focus
4096 ~ 53248 <blank> 1/4 Focus position at each preset
location.
preset_i<0~(npreset-
1)>_fliped
0,1 <blank> 1/4 Flip side at each preset location.
patrol_i<0~39>_nam
e
string[40] <blank> 1/4 (For internal device)
The name of patrol location