Need help?Do you have a question about the Vivotek SD9365-EHL and is the answer not in the manual?
General| Image Sensor | 1/2.8" progressive scan CMOS |
|---|---|
| Resolution | 1920x1080 |
| Video Compression | H.265, H.264, MJPEG |
| Audio Compression | G.711, G.726 |
| Weather Resistance | IP66 |
| Vandal Resistance | IK10 |
| Maximum Resolution | 1920x1080 |
| Aperture | F1.6 ~ F4.5 |
| Shutter Time | 1/5 sec. to 1/32, 000 sec. |
| Day/Night | ICR |
| IR Illuminators | Yes, up to 30 meters |
| Pan/Tilt Range | Pan: 360° endless, Tilt: 90° |
| Pan/Tilt Speed | 300°/s |
| Audio Input | Yes |
| Audio Output | Line out |
| Ethernet | 10/100/1000 Mbps |
| Protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, FTP, SMTP, UPnP, SNMP, RTSP, RTP, UDP, IGMP, ICMP, DHCP, NTP, DNS, DDNS, PPPoE, 802.1X, QoS |
| On-board Storage | MicroSD/SDHC/SDXC card slot |
| Operating Temperature | -30°C ~ 50°C |
| Power Supply | 12V DC / PoE |
| Minimum Illumination | 0 Lux (IR on) |
| Network Interface | RJ-45 |
| Power over Ethernet | Yes, 802.3af |
| Power Input | 12V DC |
Explains methods for connecting the camera to the internet via router, static IP, or PPPoE.
Guides on accessing the camera via web browsers, including plugin installation.
Details settings for keeping current date/time or synchronizing with NTP.
Configures sending system logs to a remote server for backup.
Provides instructions for upgrading the camera's firmware.
Restores the camera to factory default settings.
Controls IR illuminators, IR cut filter modes, and sensitivity.
Sets exposure level, mode, gain, and related IR cut filter settings.
Configures frame sizes, compression formats, and image quality for multiple streams.
Configures network connection type: LAN, PPPoE, or static IP.
Covers creating and managing user accounts with different privilege levels.
Explains methods for creating and installing SSL certificates for secure communication.
Controls access permission by verifying client PC's IP address.
Manages IP filtering rules (Allow or Deny) for network access.
Defines actions initiated by user-defined trigger sources.
Configures normal motion detection windows and sensitivity.
Defines adaptive recording, source, schedule, and capacity.
Allows setting search criteria for recorded data and viewing results.
To Next Page
