Vivotek SD8333-E - Image Settings for Preview

VIVOTEK
User's Manual - 157
according to mode settings.
profile_i0_dnr_mode 0,1 1 4/4 Enable/disable noise reduction
profile_i0_dnr_strength 1~100 50 4/4 Adjust noise reduction value of
percentage
profile_i0_eis 0,1 0 4/4 Enable / disable electronic
image stabilizer
profile_i0_sharpness -3~3,100 100 4/4 Adjust sharpness of image
according to mode settings.
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
profile_i0_saturation -5~5,100 100 4/4 Adjust saturation of image
according to mode settings.
profile_i0_saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when saturation
=100
profile_i0_hightvline 0,1 0 4/4 High TV line
profile_i0_gammacurve 0~100 0 4/4 Gamma curve
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
dnr_mode 0,1 1 4/4 Enable/Disable noise reduction
dnr_strength 1~100 100 4/4 Adjust noise reduction value of
percentage
eis 0,1 0 4/4 Enable / disable electronic image
stabilizer
sharpness -3~3,100 0 4/4 Adjust sharpness of image
according to mode settings.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100