Vivotek VC8101 - Page 149

VIVOTEK
User's Manual - 149
service port to the port occupied
by another service currently.
Otherwise, the service may fail.
Stopped service will auto-start
after changing port settings.
Ex:
Change HTTP port from 80 to
5556, and change RTP port for
video from 5556 to 20480.
Then, set preprocess=9 to stop
both service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&networ
k_http_port=5556&
network_rtp_videoport=20480”
type lan,
pppoe
lan 6/6 Network connection type.
resetip <boolean> 1 6/6 1 => Get ipaddress, subnet,
router, dns1, dns2 from DHCP
server at next reboot.
0 => Use preset ipaddress,
subnet, rounter, dns1, and dns2.
ipaddress <ip address> <product
dependent>
6/6 IP address of server.
subnet <ip address> <blank> 6/6 Subnet mask.
router <ip address> <blank> 6/6 Default gateway.
dns1 <ip address> <blank> 6/6 Primary DNS server.
dns2 <ip address> <blank> 6/6 Secondary DNS server.
wins1 <ip address> <blank> 6/6 Primary WINS server.
wins2 <ip address> <blank> 6/6 Secondary WINS server.
7.6.1 802.1x
Subgroup of network: ieee8021x (capability.protocol.ieee8021x > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable/disable IEEE 802.1x
eapmethod eap-peap,
eap-tls
eap-peap 6/6 Selected EAP method
identity_peap String[64] <blank> 6/6 PEAP identity