Vivotek VC8101 - Page 160

VIVOTEK
160 - User's Manual
7.9 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5,100 100 4/4 Adjust brightness of image.
100 is percentage mode.
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of
image when brightness=100.
saturation -5~5,100 100 4/4 Adjust saturation of image.
100 is percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100.
contrast -5~5,100 100 4/4 Adjust contrast of image.
100 is percentage mode.
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
when contrast=100.
sharpness -5~5,100 100 4/4 Adjust sharpness of image.
100 is percentage mode.
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100.
gammacurve 0~100 0 4/4 Gamma curve.
(Only used in CU8171)
lowlightmode 0~1 1 4/4 Enable/disable low light mode
dnr_mode 0~1 1 4/4 0:disable
1:enable
dnr_strength 1~100 50 4/4 Strength of DNR