Vivotek VS8100 - Page 134

VIVOTEK
134 - User's Manual
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
7.17 camera PTZ control
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enableptztunnel <boolean> 0 1/4 Enable HTTP tunnel for
camera control.
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
panspeed -5 ~ 5 0 1/4 Pan speed
tiltspeed -5 ~ 5 0 1/4 Tilt speed
zoomspeed -5 ~ 5 0 1/4 Zoom speed
focusspeed -5 ~ 5 0 1/4 Auto focus speed
preset_i<0~(npreset-1)
>_name
string[40] <blank> 1/4 Name of the preset location.
preset_i<0~(npreset-1
)>_ dwelling
0 ~ 999 0 1/4 The dwelling time of each
preset location
uart 0 ~ (m-1), m
is UART
count
0 1/4 Select corresponding uart
(capability.nuart>0).
cameraid 0~255 1 1/4 Camera ID controlling external
PTZ camera.
isptz 0 ~ 2 0 1/4 0: disable PTZ commands.
1: enable PTZ commands with
PTZ driver.
2: enable PTZ commands with
UART tunnel.
disablemdonptz <boolean> 0 1/4 Disable motion detection on PTZ
operation.
patrolseq string[120] <blank> 1/4 (For external device)
The indexes of patrol points,