Vizio D24h-C1 User Manual

A
51
The image quality is not good.
• For the best image quality, view high-denition programs
using digital sources. Connect your devices with HDMI
cables.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The picture is distorted.
• Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
uorescent lights.
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
The TV has pixels (dots) that are always dark or always lit.
• Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the volume changes.
• The TV remembers the volume level on each input source.
If the volume level on the new input source is higher or
lower than the level on the source you switch from, the
dierence may be noticeable.
• Use the Volume Up/Down buttons on the remote to
adjust the volume.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
diers from the one on the input source you switch from,
the dierence may be noticeable.
• See
Changing the Screen Aspect Ratio on page 21.

Vizio D24h-C1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	23.54 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Razor LED
Supported video modes	720p
Viewing angle, horizontal	176 °
Motion interpolation technology	-
Audio decoders	DTS Studio Sound
RMS rated power	2 W
Number of speakers	2
DVI port	No
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
Power consumption (max)	25.8 W
Power consumption (standby)	0.5 W
Power consumption (typical)	21.6 W
Sustainability certificates	ENERGY STAR
Package depth	103.1 mm
Package width	652 mm
Package height	418.1 mm
Package weight	4572 g
Certification	UL, CUL, NOM, FCC Class B, HDMI (CEC, ARC), Dolby Digital

Weight and Dimensions

Depth (with stand)	111.5 mm
Height (with stand)	380.5 mm
Weight (with stand)	3270 g
Depth (without stand)	53.59 mm
Width (without stand)	557.8 mm
Height (without stand)	361.9 mm
Weight (without stand)	3162 g