Vizio D43-E2 User Manual

3
SETTING TIMERS
Setting the Timer
hen activated, the TVs timer will turn the TV o after a set period
of time.
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Timers and
press OK. The TIMERS menu is
displayed.
3. Use the Left/Right Arrow
buttons on the remote to
highlight the period of time after
which you want the TV to sleep:
30, 60, 90, 120, or 180 minutes.
If you don’t want the sleep timer
to activate, change the setting to
.
4. hen you have nished setting
the sleep timer, press the EXIT
button on the remote.
Help
VIZIO
Network
Sleep
Timer
Input CC
ABC
Audio
Wide
Normal
Picture
Settings
PanoramicWide Zoom
2D 3DExit
TIMERS
Timer Off
Auto Power Off 10 minutes
Screen Saver Off
Blank Screen
Setti the Auto oer  eature
To help save energy, your TV is set by default to turn o after
 minutes without a video or audio signal. This feature can be
deactivated.
To set the Auto ower O feature
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Auto oer .
2. Use the Left/Right Arrow buttons on the remote to change
whether the TV will turn o. If you dont want the TV to turn o
when there is no signal, change the setting to . Otherwise,
select 10 minutes.
3. hen you have nished setting the auto power o time, press
the EXIT button on the remote.
Enabling the Screen Saver
If there is no on-screen content or static content when audio is
streaming, the backlight is turned o , saving energy. You can set
the time before the screen saver begins.
To set the Screen Saver:
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Screen Saver.
2. Use the Left/Right Arrow buttons on the remote to change
the time before the screen saver begins. If you don’t want the
screen saver to be active, change the setting to . Otherwise,
select 2, 10, or 20 minutes.
3. hen you have nished setting the screen saver time, press
the EXIT button on the remote.
To Exit the Screen Saver
Press any button other than the Volume and Mute
buttons on the remote to exit the screen saver.
Blanking the Screen
You can blank the screen while there is audio streaming. This
feature helps save energy and the life of the screen.
To blank the screen:
1. From the TIMERS menu, use the Up/Down Arrow buttons on
the remote to highlight Blank Screen and press OK.
To Exit the Blank Screen
Press any button other than the Volume and Mute
buttons on the remote to exit the blank screen.
24

Vizio D43-E2 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	42.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Display number of colors	16.78 million colors
Motion interpolation technology	-
Dynamic contrast ratio marketing name	Brilliant Contrast
Ambient light sensor	Yes
3D	No
Audio decoders	DTS
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	0.5 W
Power consumption (typical)	27.3 W
Package depth	135.95 mm
Package width	1059.94 mm
Package height	735.84 mm
Package weight	11500 g
Sustainability certificates	ENERGY STAR
Remote control type	XRT122

Weight and Dimensions

Depth (with stand)	210.06 mm
Height (with stand)	624.59 mm
Weight (with stand)	8300 g
Depth (without stand)	67.06 mm
Width (without stand)	969.52 mm
Height (without stand)	569.72 mm
Weight (without stand)	8000 g