Vizio D43-E2 User Manual

3
uri the oer Idicator  or 
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the ower Indicator ight On or O
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or , then
press OK.
Adjusting the CEC Settings
The CEC function on your TV enables you to control devices
connected to HDMI (ARC) input with the included remote, without
any programming. Using CEC, your VIZIO TV remote can control:
• ower OnO
• Volume
• Mute
Not all HDMI devices support CEC.
To enable, disable, or adjust CEC settings:
1. Set up your audio device and connect it to the HDMI-1 (HDMI
Arc) input on the TV
2. On your audio device, select the HDMI ARC input
3. Press the MENU button on the remote. The on-screen menu is
displayed.
4. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
5. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
6. Highligh CEC and press OK. Select a setting and then press OK.
• CEC - To use CEC, you must select Enable.
• Device Discovery - To determain if your device is
connected and supports CEC, select Device Discovery and
then press OK.
. Press the EXIT button on the remote.


Vizio D43-E2 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	42.5 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Display number of colors	16.78 million colors
Motion interpolation technology	-
Dynamic contrast ratio marketing name	Brilliant Contrast
Ambient light sensor	Yes
3D	No
Audio decoders	DTS
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	0.5 W
Power consumption (typical)	27.3 W
Package depth	135.95 mm
Package width	1059.94 mm
Package height	735.84 mm
Package weight	11500 g
Sustainability certificates	ENERGY STAR
Remote control type	XRT122

Weight and Dimensions

Depth (with stand)	210.06 mm
Height (with stand)	624.59 mm
Weight (with stand)	8300 g
Depth (without stand)	67.06 mm
Width (without stand)	969.52 mm
Height (without stand)	569.72 mm
Weight (without stand)	8000 g