EasyManuals Logo

Vizio D43-E2 User Manual

Vizio D43-E2
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
A
The remote is not responding.
Make sure the batteries are properly inserted matching
the - and + symbols.
Replace the batteries with fresh ones.
The TV displays “No Signal.”
Press the INPUT button on the remote control to select a
dierent input source.
If you are using cable TV or antenna connected directly to
the TV, scan for channels. See
Scanning for Channels on
.
There is no power.
Ensure the TV is plugged into a working electrical outlet.
Ensure the power cable is securely attached to the TV.
Press the Power/Standby button on the remote or on the
back of the TV to turn the TV on.
The power is on, but there is no image on the screen.
Ensure all cables are securely attached to the TV.
nsure all devices are connected correctly. Devices dier
see your device’s user manual for details.
Adjust Brightness, Contrast, or Backlight. See
Adjusting
the Picture Settings
.
Press the INPUT button on the remote to select a
dierent input source.
There is no sound.
Press Volume Up on the remote control.
Press the MUTE button on the remote to ensure mute is o.
Check the audio settings. See
Adjusting the Audio Settings.
Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the TV.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
he soud is at or diao is ot audie
Turn o Volume eveling. See
Adjusting the Audio
Settings
.
The colors on the TV don’t look right.
Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings
.
Select a pre-set picture mode. See
Adjusting the Picture
Settings
. VIZIO recommends selecting Calibrated.
Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
Ensure you are only pressing one button at a time.
Point the remote directly at the TV when pressing a button.
Replace the remote batteries with new ones. See
Replacing the Batteries.
The image quality is not good.
or the best image quality, view high-denition programs
using digital sources. Connect your devices with HDMI
cables.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The picture is distorted.
Move the TV away from electrical appliances, cars, and
uorescent lights.
Ensure all cables are securely attached.
The display image does not cover the entire screen.
If you are using TV, AV, or Component with 480i input,
press the button on the remote to change the screen
mode.
The TV has pixels (dots) that are always dark.
Your HD TV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
47

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vizio D43-E2 and is the answer not in the manual?

Vizio D43-E2 Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal42.5 \
Display brightness- cd/m²
Display technologyLED
Native aspect ratio16:9
Native refresh rate120 Hz
LED backlighting typeFull-Array
Contrast ratio (dynamic)200000:1
Display number of colors16.78 million colors
Motion interpolation technology-
Dynamic contrast ratio marketing nameBrilliant Contrast
Ambient light sensorYes
3DNo
Audio decodersDTS
RMS rated power20 W
Number of speakers2
HDMI ports quantity3
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
On Screen Display (OSD) languagesENG, ESP, FRE
Product colorBlack
Panel mounting interface100 x 100 mm
Power consumption (standby)0.5 W
Power consumption (typical)27.3 W
Package depth135.95 mm
Package width1059.94 mm
Package height735.84 mm
Package weight11500 g
Sustainability certificatesENERGY STAR
Remote control typeXRT122
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)210.06 mm
Height (with stand)624.59 mm
Weight (with stand)8300 g
Depth (without stand)67.06 mm
Width (without stand)969.52 mm
Height (without stand)569.72 mm
Weight (without stand)8000 g

Related product manuals