English - 21
To mount your TV on a wall, you will need a wall
mount. Consult the information on this page to nd
the appropriate mount for your TV.
Be sure the mount you choose is capable of supporting
the weight of the TV. After you have determined that
you have the correct mount for your TV, you can
begin the installation.
To install your TV on a wall:
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, at, stable
surface. Be sure the surface is clear of debris that
can scratch or damage the TV.
3. Remove the stands by loosening and removing
the screws.
4. Attach your TV and wall mount to the wall,
carefully following the instructions that came with
your mount. Use only with a UL-listed wall mount
bracket rated for the weight/load of this TV.
Wall-mounting the TV
Installing a TV on a wall requires lifting. To
prevent injury or damage to the TV, ask
someone to help you.
Wall-mount screw locations.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
D60-D3 D70-D3
Screw Size :
M6
Hole Pattern :
400 mm (V) x 400 mm (H)
Weight w/o Stand:
41.47 lb 56.49 lb
To Next Page
Loading...
Need help?
General
