Vizio E231-B1 User Manual

4
19
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Arrow buttons on the
remote to highlight Home Use
and press OK.
3. Use the Arrow and OK buttons
on the remote to select your
preferred language and your
country.
4. Use the OK and Arrow buttons
on the remote to highlight your
time zone and press OK.
INPUT
EXIT
GUIDE
BACK
1
4
7
WIDE
MENU
OK
VOL
VOL
CH
CH
3
6
9
—
2
5
8
0
Choose your mode.
Select Store Demo for in-store display.
Select Home Use for in-home use.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda.
Choisissez "Home Use" por Modo de Casa o "Store Demo" pour Démonstration de Magasin.
Store Mode Home Mode
5. Use the OK and Arrow buttons on the remote to set whether
daylight saving time applies in your locale.
When you are finished, highlight Next and press OK.
6. Use the Arrow buttons on the
remote to highlight how your TV
is receiving signal and press OK.
Follow the on-screen
instructions to complete the
channel scan.
7. When you have finished the channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.

Vizio E231-B1 Specifications

General

Response time	- ms
Display diagonal	23 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	-
Viewing angle, vertical	160 °
Display diagonal (metric)	58.4 cm
Viewing angle, horizontal	170 °
Supported graphics resolutions	1366 x 768
3D	No
Number of tuners	1 tuner(s)
RMS rated power	4 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
Power consumption (standby)	1 W
Power consumption (typical)	22.77 W
Package depth	107.9 mm
Package width	623.1 mm
Package height	416.1 mm
Package weight	4001 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	112.5 mm
Height (with stand)	372.6 mm
Weight (with stand)	3198 g
Depth (without stand)	53.59 mm
Width (without stand)	545.8 mm
Height (without stand)	354.1 mm
Weight (without stand)	3098 g