EasyManuals Logo

Vizio E241-A1 User Manual

Vizio E241-A1
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
5
20
CHANGING THE INPUT SOURCE
External devices such as DVD players, Blu-Ray Players, and video
game consoles can be connected to your TV. To use one of these
devices with your TV, you must first change the input source in the
on-screen menu.
To change the input device:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Settings
icon and press OK. The TV
Settings menu is displayed.
3. Use the Up/Down Arrow
buttons on the remote to
highlight the input source and
press OK. The Input Source
Selection menu is displayed.
4. Use the Up/Down Arrow
buttons on the remote to
highlight the input source you
wish to display and press OK.
Input Source Selection
TV
AV
Component
HDMI 1
HDMI 2
RGB
Watch TV from your Antenna or Cable
out-of-the-wall.
EXIT
CHANGING THE SCREEN ASPECT RATIO
The TV can display images in four different modes: Wide, Zoom,
Normal, and Stretch. Each mode displays the picture differently.
To change the screen aspect ratio:
1. Press the MENU button on the
remote.
2. Use the Arrow buttons to
highlight the Wide icon. Press
OK.
3. Use the Arrow buttons to highlight your desired screen mode
and press OK:
Normal preserves the content’s original aspect ratio.
Since the 4:3 aspect ratio is not large enough to fill the
TV’s screen, black bars are added to the left and right of
the display image.
Wide stretches a 4:3 aspect ratio picture to the edges
of the screen. Since the picture is being stretched, the
display image may appear distorted. If the program
is already formatted for widescreen viewing (1.85:1 or
2.35:1), then black bars will appear on the top and
bottom of the display image.
Zoom expands images with black bars to fit the screen.
Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are
watching widescreen (1.85:1 or 2.35:1) content, black
bars will still appear on the top and bottom of the display
image. This option is only available when the TV is
displaying a 480i/480p source.
Wide Zoom
Screen Mode
Normal Panoramic
Note: HDMI 2 is only available on the E291-A1 model.

Table of Contents

Other manuals for Vizio E241-A1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vizio E241-A1 and is the answer not in the manual?

Vizio E241-A1 Specifications

General IconGeneral
Display diagonal24 \
LED backlighting type-
Supported video modes1080p
Viewing angle, vertical170 °
Supported graphics resolutions1920 x 1080 (HD 1080)
3DNo
RMS rated power3 W
Number of speakers2
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Product colorBlack
Panel mounting interface100 x 100 mm
Power consumption (standby)1 W
Power consumption (typical)24.2 W
Sustainability certificatesENERGY STAR
Package depth89.9 mm
Package width700.02 mm
Package height446.02 mm
Package weight4849 g
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)157.48 mm
Weight (with stand)3901 g
Depth (without stand)39.88 mm
Width (without stand)560.83 mm
Height (without stand)363.47 mm
Weight (without stand)3651 g

Related product manuals