5
26
adjuStinG the audio SettinGS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu
is displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The AUDIO menu
is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
• Surround Sound - Surround sound uses DTS TruSurround
™
to deliver an immersive surround sound experience
from the TV’s internal speakers. TruSurround completes
the entertainment experience by providing deep, rich
bass and by delivering crisp details and clear, intelligible
dialog. Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume
™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult
to hear dialog or flattening sudden noises. If this occurs,
turn volume leveling off.
• Balance - Adjusts the loudness of the audio output from
AUDIO
TV Speakers On
Surround Sound On
Volume Leveling On
Balance 0
Lip Sync 0
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer Settings
Reset Audio Mode
-
+
-
+
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for
HDMI ARC output when connected to a home theater
audio system. Select PCM or Bitstream.
• Analog Audio Out - Sets the volume control properties
for the 3.5mm (headphone jack) connector when
connected to a home theater audio system. Select
Variable to control the external speakers’ volume from
the TV’s volume controls, or select Fixed to control the
external speakers’ volume from your home theater system
controls.
• Equalizer Settings - Adjusts the boost or attenuation
of different frequencies using either preset or custom
settings. See
Changing the Equalizer Settings
on page
31.
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See
Resetting the Audio Settings
on
page 27.
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
When the TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
When an external audio device is set up, TV Speakers
is automatically set to Off and Volume Control is set to
External.
• To use the TV speakers, set TV Speakers to On.
• To use the VIZIO TV remote to control the volume
of the TV speakers, set Volume Control to TV. You
will no longer be able to control the volume of the
external audio device with the VIZIO TV remote.
To Next Page
Loading...
Need help?
General
