Vizio E32-C1 User Manual

A
65
The TV displays “No Signal.”
• Press the INPUT button on the remote control to select a
dierent input source.
• If you are using cable TV, satellite, or an antenna
connected directly to the TV, scan for channels. See
Finding Channels on page 38.
There is no power.
• Ensure the TV is plugged into a working electrical outlet.
• Ensure the power cable is securely attached to the TV.
• Press the Power/Standby button on the remote or on the
side of the TV to turn the TV on.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the TV.
• Ensure all devices are connected correctly. Devices dier;
see your device’s user manual for details.
• Adjust Brightness, Contrast, or Backlight. See
Adjusting
the Picture Settings on page 24.
• Press the INPUT button on the remote to select a dierent
input source.
There is no sound.
• Press Volume Up on the remote control.
• Press the MUTE button on the remote to ensure mute is
o.
• Check the audio settings. See
Adjusting the Audio Settings
on page 32. Ensure that the speakers are set to On.
• Ensure no headphones are connected to the TV.
• Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the TV.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The colors on the TV don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings on page 24.
• Select a pre-set picture mode. See
Adjusting the Picture
Settings on page 24. VIZIO recommends selecting the
Calibrated mode.
• Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the TV when pressing a
button.
• Replace the remote batteries with new ones. See
Replacing the Batteries on page 11.

Vizio E32-C1 Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	120hz
Surround Sound	dts studio sound
Speakers Output	10 watts
Number Of Speakers	2
USB Ports	1
Network	built-in wi-fi
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
Remote Control	smart
3D	no
Power Consumption	79 kilowatt hours
Depth with Stand	7.87 inches
Height with Stand	19.03 inches
Width with Stand	28.6 inches
Net Weight with Stand	11.79 pounds
Depth without Stand	2.55 inches
Height without Stand	17.06 inches
Net Weight without Stand	11.31 pounds