EasyManuals Logo

Vizio E32-C1 User Manual

Vizio E32-C1
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
A
66
The image quality is not good.
For the best image quality, view high-denition programs
using digital sources. Connect your devices with HDMI
cables.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The picture is distorted.
Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
uorescent lights.
Ensure all cables are securely attached.
The display image does not cover the entire screen.
If you are using TV, AV, or Component with 480i input,
press the WIDE button on the remote to change the
screen mode.
The TV has pixels (dots) that are always dark.
Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurrences are
inherent to this type of product and do not constitute a
defective product.
I see “noise” or static on the screen.
When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the volume changes.
The TV remembers the volume level on each input source.
If the volume level on the new input source is higher or
lower than the level on the source you switch from, the
dierence may be noticeable.
Use the Volume Up/Down buttons on the remote to
adjust the volume.
When I change input source, the display image changes size.
The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
diers from the one on the input source you switch from,
the dierence may be noticeable.
See
Changing the Screen Aspect Ratio
on page 22.

Table of Contents

Other manuals for Vizio E32-C1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vizio E32-C1 and is the answer not in the manual?

Vizio E32-C1 Specifications

General IconGeneral
Screen Typeled
Wall Mount100mm x 100mm
Tunerdigital
Screen Size31.5 inches, 32 inches
Refresh Rate120hz
Surround Sounddts studio sound
Speakers Output10 watts
Number Of Speakers2
USB Ports1
Networkbuilt-in wi-fi
Headphones Outputno
Digital Optical Audio Outputs1
Analog Audio Outputs1
Component Video Inputs1
Composite Video Inputs1
DVI0
Remote Controlsmart
3Dno
Power Consumption79 kilowatt hours
Depth with Stand7.87 inches
Height with Stand19.03 inches
Width with Stand28.6 inches
Net Weight with Stand11.79 pounds
Depth without Stand2.55 inches
Height without Stand17.06 inches
Net Weight without Stand11.31 pounds

Related product manuals