5
23
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1. From the PICTURE menu, use
the Arrow buttons to highlight
Advanced Picture, and then
press OK. The ADVANCED
PICTURE menu is displayed.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Backlight Control -
Dynamically improves the
contrast ratio of the picture
by adjusting the backlight.
The adjustment is controlled
by the content on the
screen. Select On or Off.
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixellation and distortion
for mpeg files. Select Off, Low, Medium, or High.
• Size & Position - Adjusts the size and position of the
image on the screen.
• Film Mode - Optimizes the picture for watching film.
Select Auto or Off.
ADVANCED PICTURE
Color Temperature
Black Detail Off
Backlight Control On
Reduce Signal Noise Low
Reduce Block Noise Low
Size & Position
Film Mode Auto
Reset Picture Mode
Resetting the Color Temperature Settings
To reset all of the picture settings to the factory default settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Advanced Picture, and then press OK.
2. Use the Arrow buttons to highlight Reset Color Temperature,
then press OK. The TV displays, “Select Reset to restore factory
default color temperature settings.”
3. Highlight Reset and press OK.
4. Press the EXIT button on the remote.
To Next Page
Loading...
Need help?
General
