5
25
adjuStiNg the audiO SettiNgS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• TV Speakers - Turns the
built-in speakers on or off.
• Surround Sound -
Surround sound uses DTS
TruSurround
™
to deliver
an immersive surround
sound experience from
the TV’s internal speakers.
TruSurround completes the
entertainment experience
by providing deep, rich
bass and by delivering crisp
details and clear, intelligible
dialog. Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume
™
to maintain consistent volume levels during transitions
between program content, AV formats, and input sources.
Select On or Off. In a few cases, volume leveling may
artificially suppress volume increases, making it difficult
to hear dialog or flattening sudden noises. If this occurs,
turn volume leveling off.
AUDIO
TV Speakers On
Surround Sound On
Volume Leveling On
Balance 0
Lip Sync 0
Digital Audio Out PCM
Analog Audio Out Fixed
Reset Audio Mode
-
+
-
+
• Balance - Adjusts the loudness of the audio output from
the left and right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for
the Optical and HDMI ARC output when connected to a
home theater audio system. Select PCM or Bitstream.
• Analog Audio Out - Sets the volume control properties
for the analog RCA (red/white) connectors when
connected to a home theater audio system. Select
Variable to control the external speakers’ volume from
the TV’s volume controls, or select Fixed to control the
external speakers’ volume from your home theater system
controls.
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See
Resetting the Audio Settings on
page 26
.
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
When the TV speakers are set to ON, DTS signals
cannot be passed through digital audio outputs.
To Next Page
Loading...
Need help?
General
