3
15
SIDE
ConneCting to your network
Your TV is internet-ready. It can be connected to your home
network with a Wired or Wireless connection.
Connecting to a Wired Network (Best)
1. Connect an Ethernet cable to your router and to the
Ethernet port on the back of the TV. See below.
2. Use the Guided Network Setup to configure the TV. See
Using
Guided Setup
on page 40.
Connecting to a Wireless Network
1. Ensure you have a router or modem broadcasting as
high-speed wireless signal (802.11n recommended).
2. Use the Guided Network Setup to configure the TV. See
Ethernet Cable
Router / Modem
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
To Next Page
Loading...
