Vizio E320ME - Troubleshooting: Setup and Remote; Troubleshooting: Signal and Display; Troubleshooting: Color and Tint

The colors on the TV
don’t look right.
•AdusttheColorandTintsettingsinthePicturemenu.See Adjusting the Picture Settings in the user manual.
•Resetthepicturesettings.See Resetting the Picture Settings in the user manual.
•Checkallcablestoensuretheyaresecurelyattached.
I cannot return to
the Setup App.
•Theon-screenmenuhasguidedsetup.PressMENU, then select Help > System Reset >
Start Setup Wizard. Enter your PIN (default is 0000). Select Yes.
There are black/gray
bars on the top/bottom/
sides of the picture.
•SettheTVtoWideorZoomMode.PressMENU, then select Wide. Highlight Wide or Zoom and press OK.
•Adjustthevideosettingsofyourexternaldevice(Blu-ray
™
or DVD player).
•IfusingtheRGB(computer)input,ensureyouareusingasupporteddesktopresolution.
•Sometelevisionchannelsaddblackbarstothepicture.
The TV does not respond
when I press buttons
on the remote control.
•Insertnewbatteriesintotheremote.
•PointtheremotedirectlyattheTV’ssensor.
•EnsurenothingisblockingtheTV’ssensor.(ThesensorisonthefrontoftheTV,inthelowerrightcorner.)
The TV displays “No Signal”
•Ensureyourconnecteddevicesareturnedon.
•PresstheINPUT button on the remote and select the input to which your device
is connected (HDMI, Composite, etc).