Need help?Do you have a question about the Vizio E320ME and is the answer not in the manual?
General| Response time | 8.5 ms |
|---|---|
| Display diagonal | 32 \ |
| Progressive scan | Yes |
| Display technology | LCD |
| Native refresh rate | 60 Hz |
| Supported video modes | 720p |
| Contrast ratio (dynamic) | 15000:1 |
| Certification | FCC Class B, HDMI v1.3, VIZIO PQA, VIZIO AQA |
| Audio (L/R) in | 1 |
| HDMI ports quantity | 3 |
| SCART ports quantity | 0 |
| Common interface (CI) | No |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Backlight type | CCFL |
| Image formats supported | JPEG XR |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 140 W |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| Digital signal format system | ATSC |
Weight and Dimensions| Depth (without stand) | 205 mm |
|---|---|
| Width (without stand) | 482 mm |
| Height (without stand) | 548 mm |
| Weight (without stand) | 10432 g |
Insert batteries into the remote, observing polarity.
Connect the power cord to the TV and plug into an outlet.
Connect RF/Coaxial cable for antenna or cable service.
Turn on the TV to display the initial setup wizard.
Choose your preferred language from the list.
Choose the input location setting, e.g., Home Mode.
Select Antenna or Cable as the input source.
To Next Page
