3
63
1. From the Reset & Admin menu,
tap Set System PIN Code.
2. Use the on-screen number pad
to enter a PIN code. Tap SAVE to
continue.
3.
again. Tap Submit when you are
appears, tap CLOSE.
You can use the TV’s Reset & Admin menu to set a System PIN, restore the TV to
its factory default settings, enable/disable Smart Interactivity, and enable/disable
the Store Demo.
Adjusting the Reset & Admin Settings
To set a system PIN code:
1. From the Reset & Admin menu,
tap Reset to Factory Settings.
2.
tap YES to continue. Your TV
resets to the factory default
settings.
Note: If you set a System PIN,
then you will need to enter it
before the TV resets.
To reset the TV to its factory default settings:
To Next Page
Loading...
