Need help?Do you have a question about the Vizio E420-A0 and is the answer not in the manual?
General| Response time | 6 ms |
|---|---|
| Display diagonal | 42 \ |
| Native refresh rate | 60 Hz |
| LED backlighting type | - |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 2000000:1 |
| Display diagonal (metric) | 106.68 cm |
| Screen format adjustments | 16:9 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| 3D | No |
| Placement supported | Horizontal |
| Audio system | SRS StudioSound / SRS TruSurround HD / SRS TruVolume |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Number of OSD languages | 3 |
| On Screen Display (OSD) languages | ENG, ESP, FRE |
| Product color | Black |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 62.2 W |
| Sustainability certificates | ENERGY STAR |
| Certification | CSA-US, FCC Class B, Dolby Digital Plus, HDMI 1.4a (CEC, ARC), ENERGY STAR® 6.0, ATSC A/65, EIA/CEA-766-A, California Energy Commission |
| Package depth | 149 mm |
| Package width | 1030 mm |
| Package height | 712 mm |
| Package weight | 11518 g |
Weight and Dimensions| Depth (with stand) | 184 mm |
|---|---|
| Height (with stand) | 619 mm |
| Weight (with stand) | 8640 g |
| Depth (without stand) | 82 mm |
| Width (without stand) | 963 mm |
| Height (without stand) | 573 mm |
| Weight (without stand) | 7938 g |
Verify all components are present and undamaged before installation.
Steps for mounting the TV on a wall using a VESA-compatible mount.
Instructions for switching connected devices and adjusting picture display modes.
How to adjust picture parameters, activate the sleep timer, and manage auto power off.
Adjusting image dimensions, position, and core audio parameters like balance and lip sync.
Using parental controls for content restriction and selecting audio languages for broadcasts.
To Next Page
