Vizio E420-A0 User Manual

5
19
Adjusting the Picture Size and Position
When displaying an image from the HDMI or RGB input, the size
and position of the display image can be adjusted.
To adjust the picture size and position:
1. Ensure the input is set to HDMI
or RGB.
2. From the Picture Settings menu,
use the Arrow buttons on the
remote to highlight More, then
press OK.
3. Use the Arrow buttons on the
remote to highlight Size &
Position, then press OK. The Size
& Position menu is displayed.
4. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
• Auto Adjust - Automatically adjusts display image to
optimal size and position. (RGB input only.)
• Horiz. Position - Adjusts the horizontal (left/right) position
of the display image.
• Vertical Position - Adjusts the vertical (up/down) position
of the display image.
• Horizontal Size - Adjusts the width of the display image.
• Fine Tune - Adjusts the height of the display image. (RGB
input only.)
5. When you have finished adjusting the color temperature,
press the EXIT button on the remote.
Resetting the Picture Settings
To reset the picture settings to the factory default settings:
1. From the Picture Settings menu, use the Arrow buttons to
highlight More, then press OK.
2. Use the Arrow buttons on the remote to highlight Reset
Picture Mode, then press OK. The TV displays, “Are you sure
you want to RESET Picture Settings to the factory defaults?”
3. Highlight Yes and press OK.
4. Press the EXIT button on the remote.
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio Settings
menu is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
• Balance - Adjusts the
loudness of the audio
output from the left and
right speakers.
• Lip Sync - Adjusts the syn-
chronization between the
display image and the
accompanying audio track.

Vizio E420-A0 Specifications

General

Response time	6 ms
Display diagonal	42 \
Native refresh rate	60 Hz
LED backlighting type	-
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Display diagonal (metric)	106.68 cm
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	No
Placement supported	Horizontal
Audio system	SRS StudioSound / SRS TruSurround HD / SRS TruVolume
RMS rated power	20 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Power consumption (standby)	1 W
Power consumption (typical)	62.2 W
Sustainability certificates	ENERGY STAR
Certification	CSA-US, FCC Class B, Dolby Digital Plus, HDMI 1.4a (CEC, ARC), ENERGY STAR® 6.0, ATSC A/65, EIA/CEA-766-A, California Energy Commission
Package depth	149 mm
Package width	1030 mm
Package height	712 mm
Package weight	11518 g

Weight and Dimensions

Depth (with stand)	184 mm
Height (with stand)	619 mm
Weight (with stand)	8640 g
Depth (without stand)	82 mm
Width (without stand)	963 mm
Height (without stand)	573 mm
Weight (without stand)	7938 g