Vizio E43u-D2 User Manual

English - 16
To pair your mobile device:
1. Launch the VIZIO SmartCast app on your
mobile device and press the Power button on
the basic remote or on the back of the Display
to power on the Display.
2. From the VIZIO SmartCast app, tap on the
button in the top left corner. The side menu
is displayed.
3. Tap Setup a new Device from the list of
options.
The setup wizard appears and describes how to pair
your mobile device with the E-Series Display.
Hold your mobile device close to the VIZIO logo on
the bottom right corner of the Display for at least 5
seconds to pair it with the E-Series Display. Follow the
on screen instructions to nish the setup wizard.
Pairing your mobile device

Vizio E43u-D2 Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	not included
Screen Size	42.51 inches, 43 inches
Refresh Rate	120hz
Motion Enhancement	clear action 240
HDR	no
Built-In Speakers	yes
Surround Sound	dts studio sound
Speakers Output	20 watts
Number Of Speakers	2
USB Ports	2
Ethernet	yes
RF Antenna	no
Bluetooth	no
Network	built-in wi-fi, ethernet
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	0
DVI	0
SmartTV	chromecast
Remote Control	standard
3D	no
Depth with Stand	8.2 inches
Height with Stand	24.5 inches
Width with Stand	38.4 inches
Net Weight with Stand	21.4 pounds
Depth without Stand	3.4 inches
Height without Stand	22.4 inches
Net Weight without Stand	21 pounds