Vizio E552VLE User Manual

A
46
The image quality is not good.
• For the best image quality, view high-definition
programs using digital sources. Connect your devices
with HDMI cables.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
The picture is distorted.
• Nearby electrical devices may be interfering with the
TV. Separate the TV from electrical appliances, cars, or
flourescent lights.
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• If you are in RGB mode (computer), ensure that H-Size
and V-Position in the on-screen menu are set correctly.
• If you are using TV, AV1, AV2, or Component with 480i
input, press the WIDE button on the remote to change
the screen mode.
The TV has pixels (dots) that are always dark or always lit.
• Your HDTV is precision-manufactured using an extremely
high level of technology. However, sometimes pixels may
not display correctly. These types of occurences are
inherent to this type of product and do not constitute a
defective product.
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a
digital broadcast signal, the signal is up-converted
(improved) to match your TV’s display capabilities. This
up-converting can sometimes cause irregularities in the
image.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the volume changes.
• The TV remembers the volume level on each input
source. If the volume level on the new input source is
higher or lower than the level on the source you switch
from, the difference may be noticable.
• Use the Volume Up/Down buttons on the remote to
adjust the volume.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
differs from the one on the input source you switch from,
the difference may be noticable.
• See Changing the Screen Aspect Ratio on page 16.

Vizio E552VLE Specifications

General

Picture-in-Picture	No
Number of OSD languages	3
On Screen Display (OSD)	Yes
On Screen Display (OSD) languages	ENG, ESP, FRE
Certification	CSA, CSA-US, FCC Class B, HDMI V1.4 incl. CEC, ARC, Vizio AQ, Vizio PQ
Wi-Fi standards	Wi-Fi 4 (802.11n)
RS-232 ports	0
HDMI ports quantity	4
USB 2.0 ports quantity	2
Digital audio optical out	1
Consumer Electronics Control (CEC)	Anynet+
Sustainability certificates	ENERGY STAR
Product color	Black
Panel mounting interface	400 x 200 mm
Response time	6.5 ms
Display diagonal	55 \
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	120 Hz
Supported video modes	1080p
Contrast ratio (dynamic)	100000:1
Supported graphics resolutions	1920 x 1080 (HD 1080)
Backlight type	CCFL
Power consumption (standby)	1 W
Power consumption (typical)	102 W
RMS rated power	15 W

Weight and Dimensions

Depth (with stand)	334 mm
Width (with stand)	1400 mm
Height (with stand)	875 mm
Weight (with stand)	34473 g
Depth (without stand)	125 mm
Height (without stand)	827 mm
Weight (without stand)	29937 g