Vizio M Quantum X Series - Page 18

18
To show or hide the Ramp Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration >
Calibration Test > Ramp Test Pattern
1. Use the Navigation buttons on the remote to highlight O. Use the Left/Right
Navigation buttons to select the color for the ramp test pattern. Selecting a
color immediately shows that color ramp.
—or—
2. To hide the Ramp Test Pattern, use the Left/Right Navigation buttons to
select O.
Ramp Test Pattern
Off
To show or hide the Uniformity Analyzer Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration >
Calibration Test > Uniformity Analyzer Test Pattern
1. Use the Navigation buttons on the remote to highlight O. Use the Left/Right
Navigation buttons to select On to show the Uniformity Analyzer Test Pattern.
—or—
2. To hide the Uniformity Analyzer Test Pattern, use the Left/Right Navigation
buttons to select O.
Uniformity Analyzer Test Pattern
Off
To show or hide the Flat Test Pattern:
Menu > Picture > Advanced Picture > Color Calibration >
Calibration Test > Flat Test Pattern
1. Use the Navigation buttons on the remote to highlight O. Use the Left/Right
Navigation buttons to select the percentage brightness for the flat test pattern.
Selecting a percentage immediately shows the flat pattern at that brightness.
—or—
2. To disable the Flat Test Pattern, use the Left/Right Navigation buttons to
select O.
Flat Test Pattern
Off