3
20
To show or hide the Ramp Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Calibration Tests, and then press the Left/Right Arrow buttons
until the RAMP TEST PATTERN menu is displayed.
2. Use the Arrow buttons on the remote to highlight O. Use the
Left/Right Arrow buttons to select the color for the ramp test
pattern. Selecting a color immediately shows that color ramp.
—or—
To hide the Ramp Test Pattern, use the Left/Right Arrow buttons
to highlight O.
3. When you are nished, press the Exit button.
Ramp Test Pattern
O
To show or hide the Uniformity Analyzer Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Calibration Test, and then press the Left/Right Arrow buttons
until the UNIFORMITY ANALYZER TEST PATTERN menu is
displayed.
2. Use the Arrow buttons on the remote to highlight O. Use the
Left/Right Arrow buttons to highlight On to show the Uniformity
Analyzer Test Pattern.
—or—
To hide the Uniformity Analyzer Test Pattern, use the Left/Right
Arrow buttons to highlight O.
3. When you are nished, press the Exit button.
Uniformity Analyzer Test Pattern
O
To Next Page
Loading...
Need help?
General
