21
3
ADJUSTING THE NETWORK SETTINGS
Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed
wireless internet.
Connecting to a Wireless Network
To connect to a wireless network whose
network name (SSID) is being broadcast:
Menu > Network > Choose your network >
Enter in the password > Connect
If you do not see your wireless network displayed, click on:
More Access Points > Highlight your wireless network > Enter in the
password > Connect
Changing the Manual Setup Settings
Advanced users can ne-tune the network settings using the Manual Setup feature.
The security settings on your router may require you to enter the TV's MAC address.
To change advanced network settings:
Menu > Network > Manual Setup > DHCP
> O
1. Use the Arrow and OK buttons to adjust
each setting:
• IP Address — The IP address assigned to
the TV.
• Subnet Mask — The subnet Exit 2D.
• Default Gateway — Your network’s
default gateway address.
• Pref. DNS Server — Your preferred domain
name server address.
• Alt. DNS Server — Your alternate domain
name server address.
2. Use the Arrow buttons on the remote to highlight Save and press OK.
To nd the TV’s MAC address:
Menu > Network > Manual Setup
You can nd your TV's MAC address at the bottom of the list. The MAC addresses for
the connections in use are displayed:
• RJ45 MAC — The Ethernet or RJ45 MAC address may be needed to set up your
network when you have connected the TV to your network when you have
connected the TV to your network with an Ethernet (Cat 5) cable.
• Wireless MAC — The Wireless (Wi-Fi) MAC address may be needed to connect
your TV to your network with Wi-Fi.
Connecting to a Hidden Network
To connect to a wireless network whose network name (SSID) is not being broadcast:
Menu > Network > Hidden Network > Enter the Access Point Name >
Connect > Enter in the password
Testing Your Network Connection
To test your network connection:
Menu > Test Connection
Network
Wired Connection
Wireless Access Points
Manual Setup
Hidden Networks
Test Connection
Disconnected
Manual Setup
DHCP
IP Address
Subnet Mask
Default Gateway
Pref. DNS Server
Alt DNS Server
RJ45 Mac
Wireless Mac
Disconnected
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
0:0:0:0:0:0
0:0:0:0:0:0
Enter Access Point Name
Enter your access point name. This is used
to connect to an access point with a hidden
SSID.
TIP: If your TV is connected to a network with an Ethernet cable, you
will not see the wireless network connection menu. You must unplug
the Ethernet cable to set a wireless network connection.
To Next Page
Loading...
Need help?
General
