ENG - 23
Connecting to a Voice Assistant
(If there is no AUX port on the VA device, use a Bluetooth connection instead.)
1. Use a 3.5mm audio cable to connect the AUX port on the sound bar to an AUX port on your voice assistant device.
2. Press and hold the INPUT button on the remote for 10 seconds to enable AUX VA.
Using the AUX Port to Connect
Using Bluetooth to Connect
1. Press and hold the Bluetooth button on the sound bar or remote for three (3) seconds. Search for the sound bar
(V514x) using your VA device app. For more information, refer to the user documentation that came with the device.
2. After successful pairing, press and hold the Bluetooth button on the remote for 10 seconds to enable Bluetooth VA.
Connect to the AUX port only
3.5mm Audio Cable
OR
Only one VA mode (AUX or Bluetooth) can be enabled at a time.
To Next Page
Loading...
Need help?
General
