What to do if there is no sound on my Vizio VSB200?
If your Vizio Speakers have no sound, first, increase the volume using the Volume + button on the remote or the top of the Sound Bar. Also, check if the mute function is enabled on the remote or the source device. Finally, try cycling through the inputs using the INPUT button on the remote or the top of the HD Sound Bar.
How to fix Vizio VSB200 when there is no power?
If your Vizio Speakers have no power, ensure the AC power cord is securely connected to both the AC socket and the AC/DC Adapter. Check that the power LED on the adapter is green. Test the outlet with another device. Finally, press the Power button on the remote or the top of the HD Sound Bar.
Why is there no sound on Optical In on my Vizio VSB200 Speakers?
If there is no sound on Optical In on your Vizio Speakers, the source device may be set to AC3 (Dolby Digital) output. Change the device output to PCM.
How to stop buzzing or humming sound from Vizio VSB200 Speakers?
If your Vizio Speakers are buzzing or humming, make sure both ends of the audio cables are securely connected. Try testing with an alternate device or replacing the audio cable. You can also test the device and cable on an alternate input on the HD Sound Bar.
What to do if my Vizio VSB200 show error C?
If you are getting error C on your Vizio Speakers: * Temporarily reduce the volume of the Sound Bar and Subwoofer. * Turn the unit off, wait briefly, and then turn it back on to reset the circuitry. * If the error persists, further reduce the volume level for the specific content you are playing.
What to do if my Vizio VSB200 display error D?
If your Vizio Speakers show error D, turn off the Sound Bar and ensure the ventilation slots are clear. Make sure the Sound Bar has proper ventilation and isn't in a hot environment. If these conditions exist, reduce the volume level for the content being played.
How to resolve Error B on Vizio VSB200 Speakers?
Configure the audio sample rate of the audio source device to be either 44.1 KHz or preferably 48KHz.
Why are settings lost on my Vizio VSB200 Speakers?
When the Vizio Sound Bar is powered off, settings are retained unless AC power is removed. To keep settings, leave the AC/DC power adapter connected to AC; otherwise, settings will return to their initial values.
Details the functions and buttons of the VIZIO remote control.
Instructions for connecting a TV to the sound bar via digital or analog audio.
Guides users on connecting cable or satellite boxes using digital or analog audio.
Guides on connecting power, audio sources, and initial setup of the sound bar.
Introduces SRS TruVolume and its benefits for volume control.
Explains the SRS TruSurround HD technology for immersive surround sound.
Offers solutions for common problems encountered with the sound bar.
General| Audio decoders | - |
|---|---|
| RMS rated power | - W |
| Audio output channels | - channels |
| Number of tweeter drivers | 2 |
| Tweeter diameter (imperial) | 0.75 \ |
| Total Harmonic Distortion (THD) | 0.01 % |
| Subwoofer included | No |
| Product color | Black |
| Frequency range | 60 - 20000 Hz |
| Apple docking compatibility | Not supported |
| HDMI ports quantity | 0 |
| Connectivity technology | Wired |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
To Next Page
