1
7
For the most reliable network performance, a wired
connection is recommended.
Ethernet cables are available from many retailers in
lengths of up to 50 feet.
Connecting to a Wireless Network
To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless signal
(802.11n recommended)
• A high-speed Internet connection
2. Press the Power button on the remote to turn the player on.
Turn your TV on and select the input to which the Blu-ray
player is connected.
3. Use the Left/Right Arrow buttons on the remote to highlight
Settings, then press OK.
4. Use the Up/Down Arrow buttons on the remote to highlight
Network, then press OK.
5. Use the Up/Down Arrow buttons on the remote to highlight
Connection Type, then press OK.
6. Use the Up/Down Arrow buttons on the remote to highlight
Wireless, then press OK. A confirmation window is displayed,
highlight Yes to continue.
7. Use the Up/Down Arrow buttons to select Scan to have your
player search for available wireless networks.
8. If your network is password-protected, enter your password
using the buttons on the remote. When you are finished
select Enter, and then Next to continue.
9. When your player has connected, a success message is
displayed. Select OK to complete the wireless setup.
Connecting to a Wireless Network with WiFi Protected Setup
(WPS)
Wi-Fi Protected Setup is an easy way to connect the Player to your
home wireless network.
To connect using WPS:
1. Ensure you have:
• A router with a WPS button, broadcasting a high-speed
wireless signal (802.11n recommended)
• A high-speed Internet connection
2. Press the Power button on the remote to turn the player on.
Turn the TV on and and select the input to which the Blu-ray
player is connected.
3. Use the Left/Right Arrow buttons on the remote to highlight
Settings, then press OK.
4. Use the Up/Down Arrow buttons on the remote to highlight
Network, then press OK.
5. Use the Up/Down Arrow buttons on the remote to highlight
Connection Type, then press OK.
6. Use the Up/Down Arrow buttons on the remote to highlight
Wireless, then press OK. A confirmation window is displayed,
highlight Yes to continue.
7. Use the Up/Down Arrow buttons to select Auto WPS.
8. Follow the on screen instructions to complete the WiFi
Protected Setup.
To Next Page
Loading...
