Vizio VL260M - Connecting Coaxial (RF); Using Your Antenna or Digital Cable for Standard TV or Digital TV); Using the Antenna or Cable through Your VCR

VIZIO VL260M User Manual
Version 5/29/2009 19
www.VIZIO.com
CABLE BOX
Connecting Coaxial (RF)
Using Your Antenna or Digital Cable for Standard TV or Digital TV)
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable to the DTV/TV
CABLE/ANTENNA connector on the back of the HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote control, or directly by pressing the TV button
on the remote control.
Using the Antenna or Cable through Your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the rear of your VCR to
the DTV/TV CABLE/ANTENNA connector on the back of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote control, or directly by pressing the TV button
on the remote control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.
VCR