To Next PageTo Next PageHow to fix a Vizio VO420E LCD TV with no power?
If your Vizio LCD TV isn't turning on, ensure the power button (white VIZIO logo) is ON. Check that the AC power cord is securely connected to the AC socket. To verify the outlet is working, plug another electrical device into it.
How to restore sound on a Vizio LCD TV?
If there is no sound on your Vizio LCD TV, check your audio connections and ensure that the mute function is off by pressing the MUTE button on the remote. Verify that your TV audio settings are correctly configured and the volume is audible using the Volume + button on your remote. Also, ensure headphones are not connected.
What to do if Vizio VO420E LCD TV has power but no picture?
If your Vizio LCD TV has power but no screen image, check that the video cable is secured to the correct video output port on both your VCR and TV. Ensure any cable connected to your Set-Top Box, DVD, etc., is also securely connected to the correct output. Adjust the brightness and contrast settings, and verify the Source settings.
How to troubleshoot sound when picture is visible on Vizio VO420E LCD TV?
If you can see a picture but cannot hear sound on your Vizio LCD TV, make sure that the volume is not turned down or muted. Also, ensure that your audio input source cables are connected securely and correctly.
Why is my Vizio VO420E showing a distorted picture?
If you see a distorted picture or hear unusual sound on your Vizio LCD TV, it may be due to interference from electrical appliances, cars, motorcycles, or fluorescent lights. If you have not mounted the TV on the wall, try moving it to another location to see if this resolves the problem.
How to fix abnormal patterns on Vizio VO420E LCD TV screen?
If the picture on your Vizio LCD TV has abnormal patterns, ensure that the input source cable is securely and correctly attached to the back of your TV. Verify that the video input source is within the range of your TV by comparing the video input source’s specifications with your TV specifications.
Why is my Vizio VO420E showing noise on the screen?
When your Vizio FHDTV's digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities. This up-converting can cause noise or trash on the screen.
Why does the volume change when switching inputs on Vizio VO420E?
Your Vizio LCD TV remembers the volume level from the last time you adjusted it. If the sound level is higher or lower from another source, then the loudness will change when you switch inputs.
Why does the screen size change when switching inputs on Vizio VO420E?
Your Vizio LCD TV remembers the viewing mode from the last time you used a particular input (AV-C (Composite), AV-S (S-Video), Component, HDMI and TV).
General| Screen Size | 42 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Technology | LCD |
| Aspect Ratio | 16:9 |
| HDMI Ports | 3 |
| Refresh Rate | 60 Hz |
| Viewing Angle | 178 degrees |
| Inputs | HDMI, Component, Composite, RF, USB |
| Speakers | 10W x 2 |
Key rules for safe installation, use, and maintenance of the FHDTV to prevent damage or hazards.
Steps for assembling the TV stand and mounting the unit securely.
Guide to initial setup, including language, mode selection, and channel scanning.
Details of all input and output ports on the back of the TV.
Instructions for connecting cable or satellite set-top boxes via HDMI, DVI, etc.
Steps for connecting DVD players using HDMI, Component, S-Video, and Composite.
First steps including connecting power, language, and mode selection.
Procedures for scanning for available analog and digital TV channels.
Fine-tuning picture quality: mode, backlight, brightness, contrast, color, sharpness.
Customizing sound: audio mode, equalizer, SRS TSHD, and audio outputs.
Configuring tuner mode, auto search, partial scan, and channel skipping.
Solutions for problems like no power, no sound, black screen, and picture anomalies.
Full terms and conditions of the manufacturer's warranty coverage.
