ViziT BK-100M - User Manual

BK-
OPERATING INSTRUCTION
1
1
100M
BK-100M VIZIT
PARTS LIST
BK-100M
SAFETY INSTRUCTIONS
24 VDC
INSTALLATION
Commutator (the device hereinafter) is intended for operation within apartment doorphones as a
commutation device to provide intercom between the doorstation and apartment handsets UKP.
Commutator pc.
Operating Instruction pc.
The device does not contain voltage above .
Do not perform any connections or repair, when the power is on!
The device is fixed either with a springing clip to a DIN-rail (35 mm x 1-2 mm), or with screws (not supplied).
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM.
The list of companies is given on VIZIT.EU ( .http://vizit.eu/eurounion/)
- Drill two holes in a wall, with
diameter mm and depth mm
- Drive anchors (2) into the holes
(1)
630.
6х30 .
-
.
Fix the device by fastening 2 screws 25
in the anchors
3.5х (3)
(1) - DIN- 35 1-2
(2) - -
rail, width mm, depth mm
Holder for fixing on a DIN rail
1
2
1
2
3
Figure1 - Mounting on a wall
Figure 2 - Mounting on a DIN-rail
Note. Fasteners are not supplied.
www.vizit-group.com BK-100M Operating Instruction (revision 12 1 22015- ) /

Summary

BK-100 M Operating Instruction

Parts List

Lists the included components with the BK-100M commutator, specifying quantities.

Safety Instructions

Provides critical safety precautions for handling and working with the BK-100M device.

Installation Guide

Details the procedures for physically mounting the BK-100M unit on a wall or DIN-rail.

Connections and Wiring

Explains how to connect the BK-100M to intercom lines and apartment handsets.

Technical Specifications

Outlines the key technical data, dimensions, and weight of the BK-100M device.

Operating Conditions

Specifies the environmental parameters, such as temperature and humidity, for operation.

ViziT BK-100M Specifications

General

Brand	ViziT
Model	BK-100M
Category	Intercom System
Language	English