ViziT BVD-401 Series - User Manual

BVD-401x
BVD-401x VIZIT
BVD-401
BVD-401VPL BVD-401VPL
BVD-401CPL BVD-401CBL
FEATURES
DOOR OPEN
BVD-401x
UKP-8SM -12 -12M
VIZIT-M430C VIZIT -M460CM
VIZIT-ML300 -ML400
VIZIT-KTM600R(M) VIZIT-KTM602R(M)
SPECIFICATIONS
VDC 16…25
Wmax 3
Open drain
A 1.5
mm
BVD-401A, -VP, -VPL, -CPL 70 x 140 x 25
BVD-401CBL, -VBL 70 x 140 x 38
kg 0.22
BVD-401A - 40 ... + 45°C
BVD-401Vx - 30 ... + 45°C
up to 98% at + 25°C
doorstation is intended for use in doorphones and videodoorphones.
The following models of are available:
Abbreviations used in the models names:
A - audio doorstation;
C - Colour camera;
V - B/W camera;
B - Board lens;
Р - Pinhole lens;
L - Illumination for the camera:
IR LED for &
White LED for &
Cameras parameters are given below:
Calling a subscriber when the button is pressed
Duplex intercom between a visitor and subscriber
Entrance door unlocking by pressing the button on a subscriber’s handset / monitor
Abeep during entrance door unlocking
Door zone videomonitoring
Illumination for the camera
Doorstation is intended for joint operation with:
- Handsets , , ;
- Monitors , or similar;
- Electromagnetic lock , ;
- Keys controller , .
Operating voltage, :
Power consumption, :
Lock control
Max. switchable current, :
Dimensions, :
-
-
Weight, :
Operating conditions
- ambient temperature range:
-
-
- relative humidity of air:
=
=
=
=
=
=
A
, (Cx)
Doorstation BVD-401x
CBL
“Board”
PAL
СCIR (EIA - optional)
СCIR
0 1.
1 ± 0.15
-
CPL
“Pinhole”
VBLVP, VPL
“Board”
Parameter
Lens
Angle of view (diagonal),°
Colour system
Scanning system
Resolution, TVL
Output voltage, Vp-p
75 Ohm@
Minimum illumination of an
object at 50 cm distance from
the camera, Lux
Model
name
Colour camera
B / W camera
BVD-401A
BVD-401VP
BVD-401VPL
BVD-401VBL
BVD-401CPL
Lens
“Board”
Lens
“Pinhole”
Lens
“Board”
Lens
“Pinhole”
BVD-401CBL
Illumination
for
the camera

Summary

BVD-401 x Doorstation Models and Features

Available BVD-401 x Models

Lists the various models of the BVD-401x doorstation and their configurations.

Model Name Abbreviations

Explains the abbreviations used in the BVD-401x model naming convention.

Camera Parameters

Details the technical parameters for the cameras integrated into BVD-401x doorstations.

Key Features

Highlights the primary functional capabilities of the BVD-401x doorstation.

System Compatibility

Specifies compatible handsets, monitors, locks, and controllers for the BVD-401x.

Technical Specifications

Provides core technical data including voltage, power consumption, and dimensions.

Installation and Safety Guidelines

Parts List

Lists all components included in the BVD-401x doorstation package.

Safety Instructions

Crucial safety precautions to be observed during installation and operation.

Mounting and Wiring

Instructions for physical wall mounting and recommendations for video wiring.

Lock Connection Requirements

Details on connecting locks, including impedance requirements and damper diode.

Operation and System Wiring

Operational Procedures

Describes basic operations like picking up handset, unlocking, and intercom.

Stand-by Mode Behavior

Explains how the system automatically returns to stand-by mode after use.

Videomonitoring Function

Details on activating and using the door zone videomonitoring feature.

Wiring Diagram Abbreviations

Defines abbreviations used in the system's wiring diagrams.

System Wiring Diagrams

BVD-401 A Wiring Example

Wiring diagram for BVD-401A with monitor, lock, and outdoor camera.

BVD-401 Cx Wiring Example

Wiring diagram for BVD-401Cx with monitor and electromechanical lock.

Advanced System Configurations

BVD-401 Cx with KTM600 R Setup

Wiring diagram for BVD-401Cx with VIZIT-M430C, VIZIT-KTM600R, and lock.

BVD-401 Cx with KTM602 R Setup

Wiring diagram for BVD-401Cx with VIZIT-M430C, VIZIT-KTM602R, and lock.

ViziT BVD-401 Series Specifications

General

Type	Video Door Phone
Display	4.3 inch TFT LCD
Resolution	480 x 272 pixels
Audio Output	Built-in speaker
Power Supply	DC 12V
Mounting	Surface mount
Operating Temperature	-10°C to +50°C
Camera	CMOS
Wiring	4-wire