EasyManua.ls Logo

ViziT BVD-403 Series - User Manual

ViziT BVD-403 Series
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BVD-403A, BVD-403CPL
OPERATING INSTRUCTION
-40 х
-40 А
-40 С
С
-40 С
-40 С
VIZIT®
VIZIT
25
Doorstation is intended for operation within doorphones / video doorphones (Series Comfort).
The following models are available
doorstation to connect 1 apartment handset
video doorstation with colour camera to connect 1 video monitor
Abbreviations used in the model names
No camera
Colour camera
- Pinhole lens
- Illumination for camera
Illuminated CALL button
Beep in the doorstation and monitor / apartment handset when the CALL button is pressed
Duplex intercom
Door zone video monitoring ( )
Remote door unlocking by pressing the button on the monitor / apartment handset during intercom
Beeps to indicate door lock release
IR illumination for the camera ( )
Subscriber devices are trademarked products
apartment handsets
video monitors of Series
The product does not contain voltage above
Do not make any connections or repair, when the power is on.
Take care not to spill any liquids or chemically active substances on the product. Switch the power off before cleaning the
product. Clean by wiping with dry soft cloth. Do not use any liquid cleaners, aerosol cleaners or abrasive agents.
:
--
--
:
-
-
:
-
- 400
.
BVD 3 VIZIT
BVD 3 UKP
BVD 3 PL
A
P
L
FEATURES
BVD 3 PL
BVD 3 PL
UKP
SAFETY INSTRUCTIONS
V
·
·
·
·
·
·
·
1 -Figure Doorstation BVD-403x
www. 5BVD-403A, BVD-403CPL Operating Instruction (revision 12)vizit-group.com 91/201 -
5
Illuminated ring
4
CALL button
3
Microphone
2
IR ( for camera
in )
LEDs illumination
BVD-403CPL
1
Camera (for BVD-403CPL )only
1
2
3
4
6
5
6
Speaker

Other manuals for ViziT BVD-403 Series

Question and Answer IconNeed help?

Do you have a question about the ViziT BVD-403 Series and is the answer not in the manual?

Summary

Operating Instruction Overview

Available Doorstation Models

Lists the BVD-403A and BVD-403CPL doorstation models and their primary functions.

Model Name Abbreviations

Explains the meaning of abbreviations used in the doorstation model names (A, C, P, L).

Doorstation Features

Illuminated CALL Button

Highlights the illuminated CALL button feature of the doorstation.

Intercom and Notification Beeps

Describes audible feedback for button presses and door lock release.

Duplex Intercom and Video Monitoring

Details duplex intercom capability and door zone video monitoring (BVD-403CPL).

Remote Door Unlocking

Explains remote door unlocking functionality during intercom.

IR Illumination for Camera

Notes the IR illumination feature for the camera in BVD-403CPL.

Subscriber Devices

Lists compatible VIZIT subscriber devices like apartment handsets and video monitors.

Safety Instructions

Voltage and Repair Precautions

Advises on low voltage operation and avoiding repairs with power on.

Cleaning and Liquid Handling

Provides guidelines on avoiding liquid spills and proper cleaning methods.

Parts List and Fasteners

Included Components

Lists the doorstation, skew base, and operating instruction manual.

Fastener Types

Details the screws, gag, and anchors supplied for mounting.

Installation Order

Mounting Recommendations

Describes wall-mounting the doorstation and using the skew base for optimal positioning.

Mounting Kit MK-405

Suggests using the MK-405 Mounting Kit for sun/rain protection.

Wall-Mounting Diagram

Illustrates the step-by-step process for wall-mounting the doorstation.

Mounting Variations

Right-Side Mounting

Explains that mounting on the right side follows the same procedure as the left.

Terminal Layout and Marking

Details the terminal layout and function labels on the doorstation.

Recommended Doorstation Position

Avoidance of Light and Weather

Advises locating the doorstation away from direct sun, light, rain, or snow.

Camera Field of View

Illustrates recommended positioning for optimal camera field of view.

Wiring Diagram Reference

Directs users to the 'EXAMPLES OF WIRING DIAGRAMS' section for connection details.

Video Circuit Cable

Recommends using 75-Ohm coaxial cable for video circuits to reduce noise.

Wiring Diagrams for BVD-403 A

BVD-403 A with Apartment Handset

Shows wiring for BVD-403A, UKP-12(M) handset, power supply, and lock strike.

Damper Diode Note

Explains the requirement for a damper diode with specific lock/strike types.

Wire Length and Cross-section

Provides a table with recommended wire lengths and cross-sections for connections.

Wiring Diagrams for BVD-403 A with Outdoor Camera

BVD-403 A, Outdoor Camera, and Monitor

Illustrates wiring for BVD-403A, outdoor camera, monitor, PSU, and lock strike.

Compatible Video Monitors

Lists compatible VIZIT video monitor models for the described setup.

Wiring Diagrams for BVD-403 CPL

BVD-403 CPL with Video Monitor

Shows wiring for BVD-403CPL, VIZIT video monitor, PSU, and lock strike.

Compatible Video Monitors List

Specifies the range of VIZIT video monitors compatible with this setup.

Wiring Diagrams for BVD-403 CPL with RF Controller

BVD-403 CPL, RF Controller, and Lock

Details wiring for BVD-403CPL, RF Controller, Electromagnetic Lock, and Exit Button.

Compatible Video Monitors for RF Setup

Lists compatible VIZIT video monitors for the RF controller configuration.

Wire Lengths for RF Setup

Provides recommended wire lengths for connections in the RF controller setup.

Functional Check and Operating Order

Pre-Power On Checks

Emphasizes verifying all electric connections before switching on power.

Making a Call and Intercom

Guides on initiating a call, checking intercom, and image display.

Door Lock Release Procedure

Explains how to release the door lock using monitor buttons.

System Stand-by and Timeouts

Details system behavior after calls, lock releases, and intercom timeouts.

Video Monitoring and Intercom Activation

Describes activating door zone video monitoring and duplex intercom.

Specifications

Electrical and Physical Specs

Lists operating voltage, power consumption, dimensions, and weight.

Built-in Camera Parameters

Details camera specifications like lens, angle of view, resolution, and illumination.

Operating Conditions

Specifies ambient temperature ranges and relative humidity for operation.

ViziT BVD-403 Series Specifications

General IconGeneral
BrandViziT
ModelBVD-403 Series
CategoryIntercom System
LanguageEnglish

Related product manuals